Introduction to the flat top chain plate of the conveyor line

Flat top chain is a transmission device. The conveying surface of the flat top chain plate conveyor is flat and smooth, with low friction, and the transition of materials between the conveying lines is smooth. It can transport various types of glass bottles, PET bottles, cans, and other materials, as well as various types of bags.

The structure and working principle of a flat top chain (1) Straight top chain a. The structure of a flat top chain is very simple, and the belt conveyor line is only composed of a chain plate with hinge rings on both sides and a pin shaft, as shown in Figure 3. One side of the hinge ring on both sides is fixedly connected (tightly fitted) to the pin shaft, which is called a movable hinge ring;

The other side is movably sleeved with another chain plate and pin shaft (clearance fit), called a fixed hinge ring. The movable hinge ring and pin shaft form the hinge of the flat top chain.

Flat top chains are distinguished by material: plastic steel flat top chains, metal flat top chains; According to the usage environment or shape, there are straight top chains and side curved top chains.

Stainless steel flat top chains are currently one of the most commonly used flat top chains:

1. Characteristics: The semi-automatic barcode rack machine is widely used for conveying products in the glass product industry, food processing industry, frozen food, and other industries. Its advantages are high load-bearing, wear resistance, high temperature resistance, corrosion resistance, easy installation, stable operation, and long service life. Its disadvantages are high cost.

2. Troubleshooting during installation: If the chain plate deviates, adjust the tension shaft at one end of the driven shaft slowly and remember to adjust it quickly to avoid surface scratches; If the chain plate shakes, the conveyor frame and the supporting rollers in the conveyor tunnel should be checked for rust and refusal to rotate,

Adjust one by one; If chain jumping occurs and the operation is unstable, check whether the sprockets at both ends of the driving shaft are synchronized.